Cold Solvent Road Marking Paint Supplier China

Solvent-based cold paint, also known as solvent-borne cold paint, is a type of paint that is formulated with organic solvents as the primary carrier or diluent. This type of paint is commonly used for city road markings, parking lot striping, and other outdoor markings where durability and visibility are important.

Cold Solvent Road Marking Paint Specification LT-CSBP

The solvent-based paint for road markings at ambient temperature is an environmentally friendly product (without benzene) made up of modified acrylic resin, pigment fillers, and additives. It is a popular type of road marking paint due to its low unit cost, fast application, ease of use, and strong adaptability. It is widely used in urban roads, national and provincial highways, airports, ports, parking lots, underground garages, residential areas, and roadside curbs, and is especially suitable for old and new road markings.

Cold Solvent Road Marking Paint
SpecificationInformation
Color: White, medium yellow, deep yellow, orange-red, blue
Viscosity (25°C): 80-120s
Density (g/cm3): ≥1.3
Fineness: ≤80um
Surface temperature for application: 5-45°C
Non-stick tire drying time (25°C): 10 minutes
Adhesion: ≤ grade 4
Flexibility (mm): ≤4
Solid content: ≥65%
Packaging: 25kg iron drum
Application: Asphalt road marking construction
Shelf life: 12 months

Check out the test results of our solvent-based road marking paints for road marking jobs!

Physical CharacteristicsStandardResult
State in containerNo agglomeration, crust, easy to stir
uniformly
Pass
DensityMin. 1.2 g/cm31.48 g/cm3
Viscosity: (daubing 4 cups)Min. 100 s145 s
Drying time of no sticking to wheelMax. 15 minutes9 minutes
Covering Power WhiteMin. 9598
Covering Power YellowMin. 8085
Luminance factor whiteMin. 7581
Luminance factor yellowMin. 4552
Adhesiveness (By circle method)Max. 42
Abrasion Resistance (200r/1000g reduce weight)Max. 40 mg22 mg
FlexibilityMax. 5 mm1 mm
Solids content Min. 60 %72 %
Construction modeSpraying, brush coating, roller coating
Quantity per square meterAbout 0.35-0.4 kg/m²(about 0.3 mm thickness)
Service life3-12 months according to the vehicles’ flowrate

Lighten Traffic Solventborne Cold Marking Paint Highlights

  • Rich colors: white, yellow, red, blue, green, and black, which can be customized according to customer needs.
  • Fast-drying and wear-resistant: The paint film dries quickly, with good adhesion, and can be applied at low temperatures. It dries in 10 minutes after application and can last for more than six months, and 4-5 months in complex urban road environments.
  • Strong adhesion: There is no peeling phenomenon when sprayed on a dry, clean working surface, and the film thickness is guaranteed.
  • Bright and beautiful: The color is bright and meets industry standards. There is no yellowing, discoloration, or cracking, and the brightness factor is high, with strong visibility.
  • Easy to apply: There are no special requirements for construction machinery, and it can be applied by spray or roller brush.
  • Reflective at night: When the paint film thickness is guaranteed and combined with surface-spread glass beads, it has a strong reflective effect at night.

Benefits of Using Solvent-Based Cold Marking Paint for Road Signage and Pavement Markings

Solvent-based cold marking paint is a reliable and efficient choice for road signage and pavement markings. Its durability, visibility, quick drying time, excellent adhesion, and resistance to environmental factors make it an optimal solution for creating long-lasting, highly visible, and safe markings on roadways. When it comes to maintaining clear and durable road signage and pavement symbols, solvent-based cold marking paint stands out as an excellent choice, ensuring enhanced safety and visibility for motorists and pedestrians alike. If you are looking for other cold paints like waterborne cold paints or two-component cold paints, welcome to inquire thru sales@roadmarkingsupplies.com!

two-component cold paint marking paint

Wholesale two-component cold paints for road markings

water based cold paints for line marking purpose

Wholesale water-based paints for road markings

How to do road marking with solvent-based cold paints?

Solvent-based cold paint is applied to road surface using a cold-applied road marking method. Check the cold paint road marking guide for more information!

Road marking with solvent-based cold paints involves the following steps:

  1. Preparation: Clean the road surface and clear the area of obstacles.
  2. Marking Layout: Plan and mark reference points for accurate placement of markings.
  3. Application: Prepare the paint and choose the application method (spray, brush, or roller). Apply the paint, following the layout plan and using stencils if needed. Add reflective beads for enhanced visibility.
  4. Drying and Curing: Allow sufficient drying time and ensure proper curing before reopening to traffic.
  5. Clean-up: Clean tools and dispose of waste properly.

Note: Follow manufacturer’s instructions and consult professionals for specific guidelines and local regulations.

Custom Solvent-based Traffic Paint Formula Available

Please contact the sales rep. with your detailed customization requirements!

Cold Solvent Road Paint Package & Delivery

We will ship within 3~5 days after receipt of your payment. All liquid road paints are well-packaged. For custom appearance, please contact our sales rep. before shipment.

Liquid road paint package
cold paint line striper spray machine for road marking

On-site Marking Support

If you are new in the road marking industry, Lighten traffic will help in buying the right type road paints, line striping machines with on-site line marking training.

zebraline road marking effect

Guaranteed Results

High traffic road requires professional traffic paint marking machines with quality guaranty and guaranteed roadline results. Get quote today!

how to choose best road marking machines

Custom Appearance & Formula

You can import certified line marker equipment with custom appearance and cutom formula road paints from Lighten Traffic! Check our latest line striping machines & paints offerlist!

road marking models

Competitive Price

Are you outsourcing your line marking job to other paving companies? Save nearly 50% of your cost now by importing road marking supplies with on-site support directly from Lighten Traffic!

Solvent Based Road Marking Paints Guide

  1. Paint film appearance: smooth and semi-glossy.
  2. Flash point ≥ 31℃.
  3. Drying time: surface dry ≤ 15 minutes, actual dry ≤ 60 minutes.
  4. Theoretical paint consumption: about 130 g/m2.
  • For an 8 cm line width, one kilogram can be brushed for about 50 meters.
  • For a 10 cm line width, one kilogram can be brushed for about 40 meters.
  • For a 15 cm line width, one kilogram can be brushed for about 27 meters.
  • Under conditions of 25℃, the product should be stored in a dry and cool warehouse with a shelf life of 12 months.
  • During storage and transportation, it should be strictly prevented from collision, sun exposure, and rain, and kept away from heat sources and open flames.
  • After exceeding the storage period, it should be inspected and approved before use.

Solvent-based cold paint contains organic solvents, which can emit volatile organic compounds (VOCs) during application and drying. As a result, it raises concerns about environmental impact and air quality. Waterborne alternatives are considered more environmentally friendly due to their lower VOC content.

The durability of markings made with solvent-based cold paint depends on various factors, including traffic volume, weather conditions, and surface quality. Generally, they can last for several months to a few years before requiring maintenance or repainting.

Yes, solvent-based cold paint is commonly used on various surfaces, including concrete, asphalt, and bitumen. It has good adhesion properties and can form a strong bond with these materials.

Yes, safety precautions should be followed when working with solvent-based cold paint. Adequate ventilation is important to minimize exposure to paint fumes. Personal protective equipment, such as gloves and masks, should be worn. It is also essential to handle and dispose of paint and related materials according to local regulations and guidelines.

Let Lighten Traffic Road Marking Supplies Be Your Guide!

Whether you're looking for regular line marking machines or paints supplier or manufacturer for road marking projects or start up a pavement marking company, we will be your best line striping expert to consult.

Get A Quote

Fill out the form with your inquiry details below, and we will be in touch shortly.

Download Product Manual

Fill out the form below, and you will be redirected to the solvent-based cold paint product manual PDF download page.

Download Product Manual

Fill out the form below, and you will be redirected to the all-in-one manual thermoplastic road marking machine product manual PDF download page.

Download Product Manual

Fill out the form below, and you will be redirected to the thermoplastic paint product manual PDF download page.

Download Product Manual

Fill out the form below, and you will be redirected to the manual thermo applicator product manual PDF download page.

Download Product Manual

Fill out the form below, and you will be redirected to the self-propelled thermo applicator product manual PDF download page.

Download Product Manual

Fill out the form below, and you will be redirected to the driving type thermo applicator product manual PDF download page.

Download Product Manual

Fill out the form below, and you will be redirected to the single gun cold paint sprayer product manual PDF download page.

Download Product Manual

Fill out the form below, and you will be redirected to the double gun cold paint sprayer product manual PDF download page.

Download Product Manual

Fill out the form below, and you will be redirected to the two-component cold paint sprayer product manual PDF download page.

Download Product Manual

Fill out the form below, and you will be redirected to the convex type thermo applicator product manual PDF download page.

Download Product Manual

Fill out the form below, and you will be redirected to the Single tank thermo preheater product manual PDF download page.

Download Product Manual

Fill out the form below, and you will be redirected to the twin tank thermo preheater product manual PDF download page.

Download Product Manual

Fill out the form below, and you will be redirected to the marking die shoe product manual PDF download page.

Download Product Manual

Fill out the form below, and you will be redirected to the glass beads spreader product manual PDF download page.

Download Product Manual

Fill out the form below, and you will be redirected to the Line Striper Driver product manual PDF download page.

Download Product Manual

Fill out the form below, and you will be redirected to the convex type thermoplastic paint product manual PDF download page.

Download Product Catalog

Fill out the form below, and you will be redirected to the road marking supplies wholesale catalog download page.

Download Product Manual

Fill out the form below, and you will be redirected to the water-based cold paint product manual PDF download page.

Download Product Manual

Fill out the form below, and you will be redirected to the two-component cold paint product manual PDF download page.

Download Product Manual

Fill out the form below, and you will be redirected to the primer machine product manual PDF download page.

Download Product Manual

Fill out the form below, and you will be redirected to the road sweeper product manual PDF download page.

Download Product Manual

Fill out the form below, and you will be redirected to the line marking removal machine product manual PDF download page.

Download Product Manual

Fill out the form below, and you will be redirected to the road premarker machine product manual PDF download page.

Download Product Manual

Fill out the form below, and you will be redirected to the road air blower machine product manual PDF download page.

Download Product Manual

Fill out the form below, and you will be redirected to the road marking retroreflectometer guage product manual PDF download page.

Download Product Manual

Fill out the form below, and you will be redirected to the road marking thickness gauge product manual PDF download page.

Download Product Manual

Fill out the form below, and you will be redirected to the reflective glass beads product manual PDF download page.

Download Product Manual

Fill out the form below, and you will be redirected to the petroleum resin product manual PDF download page.