Are you looking for an effective thermoplastic or cold paint road line marking removal machine? Here is a cost-effective road marking removal machine from Lighten Traffic and a guide on How to Use It.
Introduction to line marking removal machine
A line marking removal machine is specialized equipment used to remove old thermoplastic plastic and cold paint markings on roads. It is driven by a gasoline engine that rotates at high speed and the blade exerts centrifugal force on the ground to grind the old and damaged lines. This equipment is suitable for cement and asphalt road surfaces. The removal effect on thermoplastic and cold paint markings is better. It is efficient, has fewer malfunctions, and is easy to maintain.
The road line removal machine mainly consists of a gasoline engine, a shovel, a telescopic pole, a depth adapter, a balance valve, and a brake pedal.
How does a road line removal/sweeper machine work?
The road line removal operation process is quite simple, and one worker can easily operate the machine. First, start the engine and tighten the belt to ensure that the throttle speed is not less than 5. Then adjust the depth of the blade according to the actual situation, and one person holds the brake while the other adjusts the depth at the same time. At this time, the removal agent can be used to work.
Marking removal equipment maintenance
Another important issue that cannot be ignored is the maintenance of the removal equipment. Firstly, the blade needs to be replaced if the line is removed for more than 10,000 square meters. Secondly, vulnerable parts such as the blade, blade adapter, and engine must be kept clean. The air filter must be replaced regularly. If the machine is used for the first time, change the oil after six months. After that, the life of the oil can be one year.
Marker removal operation tips
Skilled road marking operators should be familiar with these common operational issues of the line marking removal machine, including:
- How to replace the blade?
- How to reduce the damage to the blade during work? (The key is to adjust the throttle to at least medium speed)
- How to change direction when the removal machine is working?
- How to deal with oil backflow? (Clean the air filter with gasoline if it is contaminated with oil, dry it, and then add oil to the fuel port)
Consult for expert assistance
If you meet any problem in using our traffic line marking removal machines, welcome to contact us thru our online form submission and we will assist no matter what!
