Thermoplastic Pavement Markings vs Cold Paint Line Stripings

Table of Contents

Traffic markings are one of the most common traffic facilities. Traffic markings are mainly divided into: thermoplastic markings, cold paint markings, colored anti-skid markings, vibration anti-skid markings, and prefabricated markings.

Thermoplastic markings and cold paints markings are currently the most widely used method for road traffic markings. They have the characteristics of short construction time, high wear resistance, and low price.

Thermoplastic Pavement Marking Introduction

Thermoplastic markings are mainly used on large-scale road or asphalt markings, which are subject to exposure to sun and rain, snow and ice invasion, and high vehicle traffic, requiring high line performance. Firstly, it requires short drying time, easy operation, and reduced traffic interference. Secondly, the line must have good skid resistance and high wear resistance to ensure driving safety and service life.

Process of thermoplastic marking work:

  1. Thermoplastic reflective markings use primer mixed with glass beads and petroleum resin glass bead paint.
  2. Heat the paint with a preheater. The temperature should be controlled at 180-220 degrees after melting, and then stir for about 10 minutes before stripping.
  3. Mark the position and measure the data. Refer to the position and shape on the design drawing, and then use paint to mark the area.
  4. After the primer is dry, use reflective glass beads to draw stripe paint to increase night recognition. The thickness of the marking is 150mm.

Cold paint pavement marking is a popular and effective method of marking roads and pavements. This method involves the use of special road paint that is applied manually with a spray gun or roller.

Cold Paints Pavement Marking Introduction

Cold paint pavement marking is ideal for small-scale projects such as parking lots, school zones, and residential areas and striping works like restricted yellow lines, passage lines, guide bars, guide arrows, and so on.

Operation process of cold paints pavement marking work:

  1. Surface preparation: Clean and dry the surface. The first step in cold paint pavement marking work is surface preparation. The surface must be clean, dry, and free of any debris or loose material. Any oil, grease, or other contaminants must be removed from the surface. This can be done using a pressure washer or a degreaser. Once the surface is clean, it must be allowed to dry completely.
  2. Layout and design: Measure and mark out the lines using chalk or marking paint. The next step is to layout and design the pavement markings. This involves measuring the area to be marked and marking out the lines using chalk or a marking paint. The design should be based on the requirements of the project and local regulations.
  3. Mixing the paint: Mix the concentrated paint with water according to the manufacturer’s instructions. Once the layout and design are complete, the paint must be mixed. Cold paint pavement marking paint is typically supplied in a concentrated form and must be mixed with water before use. The mixing ratio will depend on the manufacturer’s instructions and the application method.
  4. Application: Apply the paint using a spray gun or roller in thin layers. The paint can be applied using a spray gun or roller. The choice of application method will depend on the size of the project and the surface being marked. For smaller projects, a roller may be sufficient, while larger projects may require a spray gun. When applying the paint, it is important to maintain a consistent thickness and coverage. The paint should be applied in thin layers, with each layer allowed to dry before applying the next. This will ensure a smooth and even finish.
  5. Drying time: Allow the paint to dry completely before allowing traffic on the marked surface. Once the paint has been applied, it must be allowed to dry completely. The drying time will depend on the temperature and humidity of the environment. In general, cold paint pavement markings will dry within a few hours. However, it is important to allow sufficient drying time before allowing traffic on the marked surface.
  6. Maintenance: Regularly clean, repaint, and touch up the markings to ensure visibility and effectiveness. Finally, cold paint pavement markings require regular maintenance to ensure they remain visible and effective. This may include periodic cleaning, repainting, and touch-ups. Regular maintenance will ensure that the markings remain visible and effective for years to come.

In conclusion, cold paint pavement marking work is a simple and effective way to mark roads and pavements. By following the above steps, you can ensure a smooth and successful project. With proper maintenance, your cold paint pavement markings will remain visible and effective for years to come.

Thermoplastic Pavement Marking vs Cold Paint Line Striping: Which is Better?

When it comes to marking roads and pavements, there are two main methods: thermoplastic pavement marking and cold paint line striping. Both methods have their advantages and disadvantages, and choosing the right method will depend on the specific requirements of the project. In this article, we will compare thermoplastic pavement marking and cold paint line striping to help you determine which is better for your project.

Thermoplastic Pavement Marking Pros & Cons

Thermoplastic pavement marking is a method of marking roads and pavements using preformed thermoplastic sheets or hot-applied thermoplastic. This method is widely used on high-traffic roads and highways due to its durability and long-lasting performance. Thermoplastic pavement marking has the following advantages:

  • High durability and wear resistance
  • High skid resistance
  • High visibility, especially at night
  • Quick drying time
  • Can be applied in a variety of colors and shapes

However, thermoplastic pavement marking also has some disadvantages, including:

  • Higher cost compared to cold paint line striping
  • Longer application time
  • Requires specialized equipment and trained personnel
  • Limited flexibility in design changes

Cold Paint Line Striping Pros & Cons

Cold paint line striping is a method of marking roads and pavements using special road paint that is applied manually with a spray gun or roller. This method is ideal for small-scale projects such as parking lots, school zones, and residential areas. Cold paint line striping has the following advantages:

  • Lower cost compared to thermoplastic pavement marking
  • Quick application time
  • Suitable for a variety of surfaces
  • Easy to make design changes

However, cold paint line striping also has some disadvantages, including:

  • Lower durability compared to thermoplastic pavement marking
  • Lower skid resistance
  • Lower visibility, especially at night
  • Requires regular maintenance and repainting

Conclusion

In conclusion, the choice between thermoplastic pavement marking and cold paint line striping will depend on the specific requirements of the project. For high-traffic roads and highways, thermoplastic pavement marking is the preferred method due to its durability and long-lasting performance. For small-scale projects, cold paint line striping is a cost-effective and flexible option. Ultimately, the decision should be based on factors such as traffic volume, surface type, and budget.

Lighten Traffic is a trust-worthy road marking supplier from China. If you are looking to stock line marking materials and machines for your business and need assistance in on-site road marking practice, welcome to discuss with us!

More Posts & News

Leave a Reply

Your email address will not be published. Required fields are marked *

Get A Quote

Fill out the form with your inquiry details below, and we will be in touch shortly.

Download Product Manual

Fill out the form below, and you will be redirected to the all-in-one manual thermoplastic road marking machine product manual PDF download page.

Download Product Manual

Fill out the form below, and you will be redirected to the thermoplastic paint product manual PDF download page.

Download Product Manual

Fill out the form below, and you will be redirected to the manual thermo applicator product manual PDF download page.

Download Product Manual

Fill out the form below, and you will be redirected to the self-propelled thermo applicator product manual PDF download page.

Download Product Manual

Fill out the form below, and you will be redirected to the driving type thermo applicator product manual PDF download page.

Download Product Manual

Fill out the form below, and you will be redirected to the single gun cold paint sprayer product manual PDF download page.

Download Product Manual

Fill out the form below, and you will be redirected to the double gun cold paint sprayer product manual PDF download page.

Download Product Manual

Fill out the form below, and you will be redirected to the two-component cold paint sprayer product manual PDF download page.

Download Product Manual

Fill out the form below, and you will be redirected to the convex type thermo applicator product manual PDF download page.

Download Product Manual

Fill out the form below, and you will be redirected to the Single tank thermo preheater product manual PDF download page.

Download Product Manual

Fill out the form below, and you will be redirected to the twin tank thermo preheater product manual PDF download page.

Download Product Manual

Fill out the form below, and you will be redirected to the marking die shoe product manual PDF download page.

Download Product Manual

Fill out the form below, and you will be redirected to the glass beads spreader product manual PDF download page.

Download Product Manual

Fill out the form below, and you will be redirected to the Line Striper Driver product manual PDF download page.

Download Product Manual

Fill out the form below, and you will be redirected to the convex type thermoplastic paint product manual PDF download page.

Download Product Catalog

Fill out the form below, and you will be redirected to the road marking supplies wholesale catalog download page.

Download Product Manual

Fill out the form below, and you will be redirected to the water-based cold paint product manual PDF download page.

Download Product Manual

Fill out the form below, and you will be redirected to the solvent-based cold paint product manual PDF download page.

Download Product Manual

Fill out the form below, and you will be redirected to the two-component cold paint product manual PDF download page.

Download Product Manual

Fill out the form below, and you will be redirected to the primer machine product manual PDF download page.

Download Product Manual

Fill out the form below, and you will be redirected to the road sweeper product manual PDF download page.

Download Product Manual

Fill out the form below, and you will be redirected to the line marking removal machine product manual PDF download page.

Download Product Manual

Fill out the form below, and you will be redirected to the road premarker machine product manual PDF download page.

Download Product Manual

Fill out the form below, and you will be redirected to the road air blower machine product manual PDF download page.

Download Product Manual

Fill out the form below, and you will be redirected to the road marking retroreflectometer guage product manual PDF download page.

Download Product Manual

Fill out the form below, and you will be redirected to the road marking thickness gauge product manual PDF download page.

Download Product Manual

Fill out the form below, and you will be redirected to the reflective glass beads product manual PDF download page.

Download Product Manual

Fill out the form below, and you will be redirected to the petroleum resin product manual PDF download page.